Product ID:22750-26270, 26270 HAZE S/G COMP A EPOXY (SUPP DATA)
MSDS Date:12/10/1992
FSC:8010
NIIN:00N006541
MSDS Number: CBVNY

RANDOLPH PRODUCTS CO

701 12TH ST
CARLSTADT, NJ 07072-0830
US

Emergency Phone: 800-438-3700

Info Phone: 201-438-3700

Preparer: S.U.

Cage: 77672

RANDOLPH PRODUCTS CO

830 CARLSTADT, NJ 07072-0830 US

Telephone: 201-438-3700

Cage: 77672

0.6 @ 20C.

CAS: 111-76-2

RTECS: KJ8575000

Fraction By Weight: 5-10%

OSHA PEL 50 PPM, S

ACGIH TLV: 25 PPM, S

2-BUTANONE; (METHYL ETHYL KETONE) (MEK) (SARA 313)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 20%

OSHA PEL 200 PPM

ACGIH TLV: 200 PPM;300 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

22 @ 20C.

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 15%

OSHA PEL 200 PPM

ACGIH TLV: 50 PPM, S

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

CONCERNING LATEST HAZARD LIST INFO & SAFE

RTECS: 9999999ZZ

CLEAN SPILL W/BRISTLE BROOMS, NON-SPARKING

RTECS: 9999999ZZ

EPA HAZARDOUS WASTE CODE - F003, HAZARDOUS

RTECS: 9999999ZZ

TLV LIMIT. SOLVENT VAPORS SHOULD BE REMOVED FROM LOWER

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CHRONIC HLTH EFTS ARE POSS FROM LONG
TERM EXPOS TO THIS MATL, INCL DRYING, CRACKING & IRRIT OF SKIN.
REACTS W/SKIN PROTEIN & MOISTURE & CAN CAUSE RASH,
SCALING/BLISTERING. HIGH CONCS MAY CAUSE HDCHS & DIZZ, ARE ANESTH,
& MAY HAVE OTHER CNSEFTS, INCL DEATH. ANIMAL STUDIES CLEARLY
DEMONSTRATED DOSE- (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:RELATED ADVERSE EFTS ON CNS,
HEMATOPOIETIC TISS, BLOOD, KIDNEYS & LIVER, ASSOC W/ADMIN OF
ETHYLENE GLYCOL MONOBUTYL ETHER (EGBE). (EXTRACTED FROM DHHS
(NIOSH) PUBLICATION NO.90-118) . N OTE:TOLUENE APPEARS ON NAVY LIST
OF OCCUP CHEM REPRO HAZS. SEEK CONSULTATION FROM APPROP HLTH
PROFESSIONALS (ING 4)
Medical Cond Aggravated by Exposure:PRE-EXISTING SENSITIVITY TO
SOLVENTS CAN CAUSE HEIGHTENED REACTION TO EXPOSURE TO THIS PRODUCT.

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR,
RESTORE BREATHING. CONSULT MD. SKIN:FLUSH W/WATER. EYES:FLUSH
IMMEDIATELY W/LARGE AMOUNTS OF WATER FOR AT LEAST 15 MINUTES.
CONSULT MD.

Flash Point Method:SCC
Flash Point:21.0F,-6.1C
Lower Limits:1.1%
Upper Limits:12.7%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . WATER STREAM WILL SPREAD FIRE.
Unusual Fire/Explosion Hazard:FLAMM LIQ - CLASS IB. KEEP CNTNRS TIGHTLY
CLSD. ISOLATE FROM HEAT, SPKS & OPEN FLAME. CLSD CNTNRS MAY EXPLODE
WHEN EXPOS TO EXTREME HEAT. WATER MAY BE (SUPDAT)

Spill Release Procedures:AVOID BRTHG SOLV VAP. ENSURE ADEQ VENT. AVOID
SPKS, FLAMES & ANYTHING WHICH COULD CAUSE FIRE. ELIM SOURCE OF
SPILL IF YOU CAN DO SO W/OUT RISK BY CLOSING VALVE, PLUGGING HOLE,
ETC. APPLY ABSORB INERT MATL (SAND, DUST, VERMICULITE) TO SPILL.
(ING 5)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DRUMS SHOULD BE GROUNDED WHEN BEING
EMPTIED. PROVIDE NIOSH/MSHA APPROVED RESPIRATORY PROTECTION AGAINST
FUMES GENERATED DURING BURNING.
Other Precautions:CONTACT LENS WEARERS SHOULD CONSULT PROVIDER BEFORE
HANDLING - CONSULT MD IMMEDIATELY IF THERE IS EYE CONTACT.

Respiratory Protection:NIOSH/MSHA APPRVD RESP TYPES SUITABLE FOR INGS
REC. NIOSH/MSHA APPRVD CHEM/MECH FILTERS REC WHEN VENT IS
RESTRICTED. PRECS MUST BE TAKEN SO THAT PERS DO NOT BREATHE
VAPS/HAVE CONT W/EYES OR SKIN. PROT AGAINST EXPOS TO BOTH VAP &
SPRAY MIST.
Ventilation:SUFFICIENT VENT, IN VOL & PATTERN, SHOULD BE PROVIDED TO
KEEP AIR CONTAM BELOW CURRENT APPLIC OSHA PEL/ACGIH'S (ING 7)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT)
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . USE PROT CREAMS WHEN SKIN CONT IS LIKELY.
Work Hygienic Practices:REMOVE & WASH CONTAM CLTHG BEFORE REUSE. USE
NORMAL HYGIENE PRACTICES DURING & AFTER HANDLING THIS MATERIAL.
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO:POLYAMIDE COATING. EXPLO HAZ:USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILD-UP & POSS AUTOIGNIT/EXPLO WHEN EXPOS TO
EXTREME HEAT. REMOVE ALL NON-ESSNTL PERS FROM FIRE AREA. VAP IS
HVR/AIR & CAN TRAVEL CONSIDERABLE DISTS TO SOURCE OF IGNIT &
FLASHBACK. EYE PROT:& FULL LENGTH FACESHIELD .

Boiling Pt:B.P. Text:>172F,>78C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:1.34
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:THIN GRAY LIQUID; TYPICAL SOLVENT ODOR.
Percent Volatiles by Volume:52.2

Stability Indicator/Materials to Avoid:YES
AVOID STRONG OXIDIZERS, ACIDS & ALKALIES.
Stability Condition to Avoid:THIS PRODUCT IS STABLE UNDER NORMAL
STORAGE CONDITIONS.
Hazardous Decomposition Products:THERMAL DECOMPOSITION RELEASES CARBON
MONOXIDE &/OR CARBON DIOXIDE.

Waste Disposal Methods:SOAK LIQS W/SAWDUST OR RAGS & REMOVE. FLUSH
W/WATER IF POSS. AVOID SKIN CONT. DISP SHOULD BE I/A/W LOC, STATE &
FED REGS. DO NOT INCIN, CUT/WELD EMPTY CNTNRS. WHEN DISCARDED THIS
MATL IS HAZ WASTE. TR ANSFER LIQ TO CNTNRS FOR RECOVERY/DISP.(ING
6)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.